Enter the second direction of the bearing of a line segment. This is usually in the E or W direction.
Enter the bearing of a line segment or the delta angle of a curve. This is usually between 0 and 90 degrees.
Enter the first direction of the bearing of a line segment. This is usually either N or S.
Enter the bearing of a line segment or the delta angle of a curve.
Enter the distance of a line segment or the radius of a curve.
Enter the distance of a line segment or the radius of a curve.
Select the Right Hand radio button if the curve is a right-handed curve.
Select the Left Hand radio button if the curve is a left-handed curve.
Select the Line Segment radio button if the next piece of the bounds is to be a straight segment.
Select the Curve radio button if the next piece of the bounds is to be a curve. Then enter the radius and delta angle of the curve.
Create a plot by entering the bearing and distance of each segment as you go. If the segment is a curve enter the radius and the delta angle. The plot must begin with a line segment.
Create a plot by entering the bearing and distance of each segment as you go. If the segment is a curve enter the radius and the delta angle. The plot must begin with a line segment.
Click Apply to accept the entered data for a given segment of the polyshape.
Click Remove to remove the last segment or curve entered.
Click Cancel to stop the tool and delete the polyshape.
Click Done if you have finished entering all data.
(January 1994).iso/Diehl Graphsoft/US English/MiniCad/MiniCad-68K/Externals/PropertyBoundsTool/PropertyBoundsTool.rsrc/ICON_11000_Skeleton Icon.png){kind=link}